Alpine Hardware Premium Heat Pump Drillless Drill-Less Window Air Conditioner & Heat Pump Bracket - Window AC Support - Supports Air Conditioners Well Over 200 lbs. - No Drilling 2023 Model

From what I can see, the materials used in this project seem sturdy and durable enough to withstand the elements in the long run. However, accessing and aligning screws and nuts in certain areas can be challenging due to design flaws. Additionally, the instructions only provide a generic list of necessary tools such as wrenches and sockets without specifying the required size. This, along with the inadequate design, can result in wasted time and effort when constructing what should have been a relatively simple device.

I have several problems with this window support bracket, first of which is that it came with ineffective hardware. It doesnt have enough washers for all of the pieces, and half of the nuts that came with the package use plastic stoppers which cause them to cap off at a certain point on the bolt when threaded on. This means they cant be tightened down all of the way and would require at least twice as many washers as the kit came with to make the join on these bolts secure in any sense. Second although the kit claims to fit most windows, at the smallest setting for the brackets, the legs still dont have a tight enough hold on my window ledge and are just too heavy for a second story window. They dangle and pull the entire bracket down. Not to mention, the weld for the main support ledge is crooked which means getting the center support in between the main two arms was nearly impossible and tilts the entire ledge at an angle when joined. This causes the screws for the legs to come loose with time. I will be returning this product as soon as possible.

Lo recomiendo al 100% es muy fuerte y muyyy practico

We installed this on our RV to hold a window unit. It worked great, and even survived a direct hit from hurricane Ian at a category 4, it held strong with the unit in place. Hated spending $75 for it, but wow, cant complain now.

This review covers the drill-less version of the bracket. Make sure this will work with your air conditioner. The bracket arms that extend out are between 13” and 16” apart so edge to edge the feet on the window side of your air conditioner need to be in this range. I first tried this with a 6000 BTU Amana air conditioner but the “feet” on the front of the unit were two narrow so the front towards the window was not supported properly. Then I used it on a Frigidaire air conditioner. The feet on the Frigidaire air conditioners are 2.5 time the width of most other window air conditioners so it rested on the bracket perfectly. The feet on the Amanda were about 1/2 an inch wide. The feet in the Frigidaire were about 2 3/4 inches wide.

I bought four units and putting the first one together took awhile. The directions were minimal and pictures didn’t help much. The following 3 were easy since I became an expert at it. Installed, they are working as advertised. It’s a smart system. Just be prepared for a lot of assembly.

Dislike directions. Definitely sturdy. But now my unit leaks a lot down side of my wooden house all day long.

The unit was difficult to assemble. One of the supports that goes against your house doesn’t hold up and slips off the house. In no way was this stable and after many attempt to “make it work” we threw this crap in the trash

Ive got two of these. Im not unhappy with them overall, but they are quite difficult to set up. The feet have some trouble connecting with any exterior wall that has siding (which is pretty much every wall). The only way I can get the feet to connect with the wall is if the feet are positioned very inward, but then stability is horrible. Thats the main reason for the 3-star review. They work, but they take some fiddling and you for sure have to screw them into the windowsill directly. They come with spacers to help line up the screwed surface with the window frame so your A/C doesnt sit tilted inward. The provided screws will work for one install, they strip on the heads very easily, but they are a standard size so your local hardware store will have replacements for next year. Also, word from the stupid, careful not to pinch your fingers in this as it does fold completely and with zero resistance so it can collapse (when not mounted) and pinch your fingers easily. Its also very heavy and so the pinch has a real bite to it.

The hardest part about installing this bracket was drilling the holes - but that was because of how I installed it. I wanted my AC unit outside of my window, so I could still shut the window. I did this by creating a plywood baffle that I could insert inside the recesses for the screen. I removed the screen, put the baffle in, then used putty tape to seal it up around the edges. To mount the AC unit and bracket this way, meant I had to drill and mount the bracket on the outside brick/block sill of my window. So with some research, I settled on using some carbide bits to drill with, and special blue anchor screws. I quickly found that: a) you want to drill the block dry b) you want to periodically use canned air (or a compressor) to blow out the hole as it fills with dust If you dont do those steps - you end up with the drill only going so far, then not going any further. So drill, blow out the hole, drill some more, etc - until you get to the depth needed. But other than that difference, I followed the instructions just as they were written, and things went together really well and fast. Ive had the bracket up for about 2 weeks now, and it works great. It only took a couple of hours to install (I took my time, as I didnt want to mess up the block), then a few more to make the baffle (a week or so later, I caulked it, painted it, then re-installed it properly - but I did use it for a week without all of that). The only other extra thing I did was add a couple of L-brackets to the holes, to keep the unit from potentially sliding backwards. Overall, the install turned out great, and Im very pleased with the product.