Engineer SS-02 Solder Suction Device

This is the best solder sucker I have ever used. The flexible silicon tip gets in tight and can sit on the soldering iron without damage. This is the only solder sucker I have seen that will clear through-holes to the point you can get a new component into the hole. Well worth the price!

Good product for me as an occasional solderer. Worked as advertised.

This is the best made solder sucker I have ever used. Out of the package the top was bent from shipping damage. Wonder how because trying to bend straight was almost impossible. Very well built. Worked perfectly before I straightened since the bent part didnt affect any part of the travel but still drove me nuts till it was straight. A little spendy compared to the plastic $5 counterparts but performance is absolutely no comparison. The silicone tip allows for a much more conformed suction area and really powerful spring pulls out huge blobs of solder. No plunger guard either which for me is a plus, can just slam it on my leg to charge spring. Just be careful if working on smaller things to not get too close or it will get ya!

The few bad reviews Ive read must be operator error because this is the best one Ive ever used. When resetting the spring I noticed that if you push it past reset it pushes the solder out the tip so maybe thats where others were going wrong.

this is the best manual hand solder sucker ive ever used. short of a electric vacuum sucker this works. small fits in your hand, yet has the suction to clear the hole.

Very nice quality sucker. Excellent in build and in function.

Ive used cheap desoldering pumps for years and years and they all eventually break down. I decided to spend a bit more this time and I was not disappointed: - the tool is of obvious quality. I dont know how long it will last, but definitely far longer than the cheap ones - the suction is noticeably better. thats the kicker, i didnt realize how much better and easier it would make my repairs Thats basically it. Get it. Its worth it.

This is, hands down, the best solder sucker I have ever used in my 45+ years of playing with molten tin and lead. Follow the directions, clean the solder out as youre going, and you will not be disappointed.

Spent the premium for this desoldering pump and it is definitely worth the extra bucks.

Oh my, what an excellent tool this is. It is nice looking too. Top notch engineering- heavy anodized aluminum, very strong spring, o ring sealed nozzle that is easy to remove for cleaning. I find the silicon tip easy to use and effective. The spring is strong enough that its right on the edge of needing two hands to reset the pump. I expect it will soften up a bit as it breaks in. It is well packaged with clear illustrated instructions for use and maintenance. I am not an every day solderer so I wish it came with a little storage sack to keep the extra silicon tubing. The tip uses about 1/4 of tubing and there is about 2 of extra. The directions say the max temp for the tubing is 350C but after a couple of dozen desolders at 450C, the tip shows no signs of wear or discolor. I expect the extra tubing will last a long time- if it doesnt get lost somewhere in my workshop. This solder sucker should last a lifetime with just a little care. Recommend.