Genie GSTB-R STB-BL Replacement Safety Beams, Black, 2 Pack, Black, one size (GSTB-R)

Extremely easy to install. If you have a Genie opener, the bracket location will be the same as your old one. Just unscrew and screw in your new brackets that come with the kit. Only thing that was moderately hard was pulling the sensor from the bracket. But just use force, it wont break. It makes it easier to install the bracket first.

A simple and effective replacement for the original sensors.

During a recent electrical storm, a close lightning strike took out a few electronic devices in and around our home. One thing I noticed was that my Genie garage door opener was no longer functioning. The light would come on but the door would not go up or down. I checked the little LED lights, located on the Safe-T-Beam sensors by the garage door, and noticed that the red LED was blinking in a reoccurring pattern. I went to the Genie website and checked their support page. I was delighted to find a useful troubleshooting guide, which utilizes the LED lights on the Safe-T-Beam sensors to diagnose potential problems with your Genie garage door opener. This handy troubleshooting guide can be found here: [...] The guide helped me determine that my opener motor and electronics were OK but one or both of my Safe-T-Beam sensors were bad and needed to be replaced. I almost purchased the replacement kit from the Genie website but decided to check Amazon.com first. Im glad I did, as I found the exact same kit at a much lower price. The Genie 34094R Garage Door Opener Replacement Safe-T-Beam Kit is the same as the previous 35048R kit, and is the perfect replacement for every Genie garage door opener that utilizes the Safe-T-Beam sensors (all models manufactured from 1995 to current). This easy to install replacement kit includes the following items: - Both Infrared eyes/sensors (one with Red LED and one with Green LED) - Two Safe-T-Beam sensor mounting brackets - Bell wire for connecting sensors to opener unit (approx. 100 ft. of wire included) - Mounting hardware (screws, washers & nuts) for brackets and sensors - Installation instructions I did not need to replace the wire, as my previous wires were still in great shape. I found that I was not able to use my existing sensor mounting brackets, as the new Safe-T-Beam sensors had a slightly different mounting method. Luckily the 34094R kit comes with new mounting brackets (and everything else you would possibly need to install the new sensors). The installation instructions are very easy to read and understand, and provide several illustrations to help make the process simple. I had the new sensors installed in about 20 minutes and my Genie garage door opener was working perfectly once again. The 34094R Safe-T-Beam replacement kit is a genuine Genie service item and contains everything needed to replace the Safe-T-Beam sensors on all Genie garage door openers manufacturer on or after 1995. It is easy to install and works flawlessly. The cost is very reasonable and I highly recommend this product to anyone with a Genie opener that needs one or both Safe-T-Beam sensors replaced.

It literally was just screwing in two screws per sensor. I had the old square style sensor and these replaced those. They are nice and solid and look great.

Works for my legacy operators.

Our sensors stopped working and when the sun was setting in the afternoon it would blind one of the sensors and the garage door would not close in the late afternoon when sun light was shining directly into the sensors These new ones cured The problem and work great

Ridiculously easy to install. Inexpensive, but valuable replacement to my very old boxy pair.

These Genie sensors work perfectly, they are very well made, five starts

After a brief flooding event of about 8” of seawater for a few hours, one sensor went bad. I replaced both in about 15 minutes time and my Genie Door opener was back in operation. These were identical to what came with my ReliaG 850.

The garage door stopped working and found red light on one of the sensors. Replaced the old sensors with these and this solved the problem.