JPUNG for iPad Mini 1/iPad Mini 2 Screen Replacement,A1432 A1454 A1455 A1489 A1490, Touchscreen Digitizer (White), with Home Button, Full Repair Kit

I got this screen to replace the screen of an iPad mini 1. The whole package comes with all the accessories needed for the screen replacement. The instruction paper is clear and easy to understand, you can look up videos online to see the step to step. One note, at the end, when putting on the replacement screen, after peeling off the double sided tape, you should also use the glue tube comes with the screen. Without the glue, the screen can detach again and detach the digitizer by itself, which can lead to losing the touch functionality. Customer services from JPUNG is amazing. The screen touch function stopped working after a few days post-replacement. I contacted JPUNG customer services and they replied within a day. What happened was the digitizer was detached by itself, so I just needed to remove the digitizer and reattach it--the screen is now working perfectly. I have fixed laptops, MacBooks, iPhone, and iPad before from replacing batteries to screen and motherboards. The material and the screen sending from JPUNG is top notch quality and I am very satisfied with the replacement screen. Highly recommended this seller and hope the screen will work for the years to come.

I repaired 3 iPad minis with kits from these folks. Great product, good instructions. Be patient, the first took me a while, the second not so long, by the third I was ready to open my own repair shop. Definitely worth the price and a great DIY money saver.

Good

Value for money

This thing is junk, don’t buy, I am one of those that never write reviews, I installed it correctly and as others mentioned you have to look a video up because the included directions are terrible and incomprehensible, after installing and starting iPad literally half of the screen doesn’t work, you have to flip upside down to get the “ slide to unlock” on the other side of the screen to unlock it, then when open nearly the entire screen has dead zones, don’t buy it, find another one

Pretty easy. I had an iPad mini with a badly badly cracked/shattered screen. Unusable. Couldn’t track finger movement. I was quoted various prices from 150 to nearly 300 to have it repaired professionally either through OEM or third party. A refurbished model was only about a 100 bucks. So I decided to have a go if trying the repair myself for under 20 bucks. Mine probably went easier than most. My screen was so badly damaged, the glass literally just popped out. I didn’t have to fight to remove it at all. From there, just a handful of screws, and an electrical connection swap, and it was done. Start to finish less than 15 minutes. It works great. Just like new. Every movement is recorded perfectly everywhere on screen. I also had a “crunchy” home button before (it was a prize that was won, and when received, it had been purchased too long ago to be covered by warranty. The box had apparently been dropped, as there was already a small chip on screen and a small crack in LCD off to extreme side where it didn’t interfere with display or function, and home button was crunchy). The replacement glass came with new home button. So technically, this works better than when it was originally received. Also, I learned how easy it would be to swap the LCD screen out too for 40 bucks. Far easier to repair this little guy than I realized. After learning this, I’m appalled at the rip off level charging being done by OEM and aftermarket repair groups. A 15 to 17 dollar part (probably only 10 bucks when bought in bulk) and less than 20 minutes of work with a return of 200 to 300 dollar charge to end user. Disgraceful. These groups should be ashamed. Don’t get suckered. Try it yourself. It was really not that difficult. Just go slow, follow instructions, watch at least 2 different videos on it, and you can do this too.

Very good kit. You need heat. Impossible without it. I used a heating pad. I dont think a blow dryer will work because the heat dissipates too fast. With heat all the adhesive loosens up and things are easy to take apart. The hardest step is the repair is lifting the LCD panel after you get the broken digitizer off. Also, remember to carefully clean the LCD before you adhere the new digitizer. Overall I like the quality of the new digitizer.

The screen went on quick and easy but broke within 30 minutes even with and otter box case on it. Quality of the screen is not good.

Easy to follow instructions. Included tools were perfect

I purchased this as a backup for my sons iPad. It stayed in the box on the shelf until I used it. Here I am replacing the screen as intended by directions that are HORRIBLE to begin with. Now his iPad that did work before no longer works and the screen doesn’t.