ELEGOO ABS-Like 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Grey 1000g
-
W. M. Murphy
> 24 hourIt does turn a slight yellow.
-
Prof. Simeon Conn
> 24 hourVery pleased. Its translucent with good color. The smell is much less than the Anycubic resin
-
TheAtomicSoul
> 24 hourThis material prints well and has a small amount of flex! I mix Siraya Tech Tenacious with ELEGOO ABS-Like resin (clear red and clear blue) in a 1:3 ratio. (IE 1/4 Tenacious) This has allowed me to create models with more than enough flex to keep weapons and legs from breaking when dropped without being overpriced.
-
alix
> 24 hourDont spill it on touch screens. This ruins the touch screen. No complaints.
-
Gail Gill
> 24 hourI love the price on this stuff but I have only one problem with it. After the print cures in UV it goes from a beautiful clear to a frosty. It works as its supposed to tho so no problemo.
-
CodeWarriorMalo
> 24 hourSo far the best resin for consistency. I have printed this mostly at 50 microns, but have done a few at 20. The grey color is great for miniatures, painting is not necessary if you dont mind monochrome playing peices.
-
dwight dunbar
> 24 hourI should have taken a picture of the vat when I took the prints out. It was nothing but wasted resin in large clumps all over the vat. This mess tore through the FEP and cured on the screen. 2 out of the 5 prints running at the time failed. This is where it messed up the screen. The print was supposed to use 227ml but all 500ml of resin was used up because it was all turned into clumps. I used the setting printed on the bottle for the timing. If this mess can’t be cleaned off of my Photon Mono X I am going to be pissed! The only up side is that the completed prints are very durable despite not being perfect in their smooth surface detail.
-
Weston Durland
> 24 hourThis stuff is incredibly toxic to your lungs. Be very cautious. Use with respirators, organic respirators. Dont assume all resins are alike. If you have one that doesnt give you issues, this one is a whole other beast. Having had air filters and pumps outside and masks, I still have horrible reactions to it. Its insidious and delayed in its effect to you. You do not want to damage your lungs. Thankfully I stopped using it before too much damage was done (I think). Dont be like me. Read and UNDERSTAND EVERYTHING the MSDS sheet says before you buy and use (assuming you can find it, its on the website of these companies and usually not on the amazon page). The last thing you want is to be on the lung transplant list because of your hobby. And leave no mistake, thats where youre headed if you use this and arent 1000% fullproof.
-
arthouse-studio
> 24 hourIm sticking with the Elegoo resins because I can count on them to deliver consistent results. The detail is superb, and all things considered, very low odor. Prints drain quickly and clean up in IPA 99% is fast. Shipping and packaging are great, never had a problem. If you need a great go-to resin at a reasonable price stick with Elegoo.
-
Lance Poruchnek
> 24 hourGood resin a little brittle but I would still recommend!
ELEGOO ABS-like photopolymer resin is a type of polymer that changes its physical properties when introduced to light, and it"s VOC free. In the case of 3D printing, this is a typical liquid plastic resin that hardens when exposed to a light source, such as a laser, a lamp, a projector or light-emitting diodes (LEDs) and most of these light sources irradiate ultraviolet (UV) light, which works perfectly with our photocuring resin. It"s a perfect companion for LCD 3D printers, and the print quality is excellent in terms of the details and performances.
Precautions:
- Shake well before use
- Recommended temperature 20°C - 25°C
- Always wear gloves and mask to avoid direct skin contact
- Keep away from children, dust and direct sunlight
- Wash with plenty of water immediately if you get direct skin contact with resin
ELEGOO Photopolymer Resin
Printing Setting:
- Bottom Exposure:60s
- Normal Exposure:8s
Resin Parameters:
- Viscosity: 200-350MPa·s
- Absorption band: 355nm-410nm(wavelength)
- Density: 1.05-1.13g/cm3
- Flexural Modulus: 601.542±10% MPa
- Bending Strength: 30.405±10% MPa
- Thermal Deformation Temperature: 80℃
- Volume Shrinkage: 3.72-4.24%
- Linear Shrinkage: 1.05-1.35%
- Tensile Strength: 30.806±10%Mpa
- Tensile Modulus: 353.891±10% Mpa
- Shore Hardness: 85-88D
- Glass Transition Temperature: 100℃
- Notch Impact Strength: 41-48j/m
- Shelf Life: 2 year
Light Odor and Consistent Success
Photopolymer resin can be smelly in some cases. With the refined formula, ELEGOO resin has a very light odor and no pungent smell.Long-time printing can be demanding, but ELEGOO resin ensures consistent, high-quality prints.
Less Brittle and Higher Tenacity
When it comes to printing industrial parts where the toughness of the model is critical, you will need a high standard resin to enable the prototype works flawlessly without any issues. Say no to brittleness and use resin of higher tenacity.
High precision and Low Shrinkage
The fantastic detail performance of the models printed with resin is just like artwork. With low volume shrinkage and volume shrinkage, ELEGOO ABS-like resin ensures the print accuracy and make sure all the parts printed to fit in the right place.
Wide Applications
ELEGOO photopolymer resin is compatible with the LCD 3D printers using the UV light source to cure models.
It has a wide range of application from board game miniatures to industrial parts and components.
You can also use it to print your 3D CAD design works and make it from an idea into reality.
The only limitation is your imagination. Print now and go with ELEGOO.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| ELEGOO 8K Standard Resin | ELEGOO 8K Water Washable Resin | ELEGOO Standard Resin | ELEGOO Water Washable Resin | ELEGOO ABS-Like Resin | ELEGOO Plant-Based Resin | |
| Max. force（KGF） | 165.7±10% | 103.5±10% | 137.6±10% | 105.10±10% | 167.1±10% | 116.5±10% |
| Tensile strength（MPA） | 39.06±10% | 24.39±10% | 32.437±10% | 22.89±10% | 39.39±10% | 27.463±10% |
| Deformation at the point of maximum force（mm） | 5.32±10% | 5.66±10% | 9.863±10% | 8.45±10% | 6.41±10% | 12.338±10% |
| Yield point elongation(%) | 5.71±10% | 5.37±10% | 5.545±10% | 6.92±10% | 6.49±10% | 5.574±10% |
| Elongation at break（%） | 9.4±10% | 10±10% | 17.484±10% | 14.91±10% | 14±10% | 21.811±10% |
| Flexural strength (MPa) | 48.93±10% | 28.08±10% | 29.826±10% | 15.05±10% | 40.54±10% | 20.27±10% |
| Flexural modulus (MPa) | 1412.8±10% | 760.53±10% | 768.676±10% | 327.96±10% | 1089.62±10% | 531.271±10% |
| Impact strength（j/m） | 80±10% | 68±10% | 40.03±10% | 86.90±10% | 205±10% | 58±10% |
| Tensile modulus(MPa) | 538.4±10% | 327.7±10% | 424.97±10% | 232.05±10% | 538.9±10% | 328.562±10% |
| Reason to buy | Non-Brittle and Less Odor | Non-Brittle and Less Odor | Low Shrinkage | Water Washable, Easy to clean | High Toughness | Safe and no irriation |