ELEGOO ABS-Like 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Grey 1000g
-
Ahmad
> 3 dayThe resin is not really white after dray it its become like beige but i like it. The print details is amazing and it price is good
-
Patrick
> 3 dayGreat red to use with the Elgoo Mars.
-
Rits
Greater than one weekusing grey. Prints well for the price. As other mentioned, if the price goes up there are better options. I print on a Photon at 70/12 with good results. Seems to settle quickly, so make sure to stir/shake well before printing.
-
Chris Hellweg
> 3 dayThis resin prints great! Very low odor and high detail!
-
George E. Bridges II
> 3 dayThe quality of this product is amazing. I am a new 3d Resin printer and having a product that just works and works the first time helped me through the learning curve. Im impressed with the quality of the resin - the formulation works very well in the elegoo mars 3d printer. I am very happy and have reordered multiple times!
-
Tim S.
> 3 dayI normally use Anycubic in my photon ,but wanted to try different resins. I tried Siraya grey and Elegoo standard grey. This elegoo I used recommended settings and 6 out of 6 prints did not stick to the build plate. I switched back to the siraya ,same file..and the print came out fine. I had tried increasing the initial exposure time to see if that helped,but nope..print on the FEP,none on the plate. Wasted some bucks on this bottle,but now I know ..will stick with siraya ,liked it better than Anycubic as well.
-
Neil W. Brabham
> 3 dayWorks as advertised.
-
Matt Ryan Fochs
> 3 dayI had heard about the Elegoo resin and for the price decided to give it a shot. The quality of print is great and the resin is a little more liquid then others I have tried (actually makes clean up easier in my opinion). The white comes out of the printer looking amazingly bright but after a little curing it stars to get more cream. I am working on a custom scrabble board design and wanted to have tiles that looked like the old plastic/clay tiles from games when I was a kid. With a full day of exposure to sunlight, the white resin turns almost completely beige. In my case I wanted that, but for others looking to have a white part, this may not be the right resin for you.
-
Shu Peng
> 3 dayThis is my go-to resin for a long time. I enjoy using it and find it to give resolution and print results. It is thicker than model resin and thus needs more care to print. You need to be careful when printing on a larger printer as it is thicker and requires more care to get it print consistently on difficult models. Overall a good value for the results
-
Dave in Iowa
> 3 dayI got my Anycubic Photon 3 days ago and this is my first print with non_Anycubic resin. I think the results speak for themselves, the print is flawless. It just needs a little cleaning. I may have over-cured the print with UV giving it a slight yellowish tint. Normally the resin is robins-egg blue.
ELEGOO ABS-like photopolymer resin is a type of polymer that changes its physical properties when introduced to light, and it"s VOC free. In the case of 3D printing, this is a typical liquid plastic resin that hardens when exposed to a light source, such as a laser, a lamp, a projector or light-emitting diodes (LEDs) and most of these light sources irradiate ultraviolet (UV) light, which works perfectly with our photocuring resin. It"s a perfect companion for LCD 3D printers, and the print quality is excellent in terms of the details and performances.
Precautions:
- Shake well before use
- Recommended temperature 20°C - 25°C
- Always wear gloves and mask to avoid direct skin contact
- Keep away from children, dust and direct sunlight
- Wash with plenty of water immediately if you get direct skin contact with resin
ELEGOO Photopolymer Resin
Printing Setting:
- Bottom Exposure:60s
- Normal Exposure:8s
Resin Parameters:
- Viscosity: 200-350MPa·s
- Absorption band: 355nm-410nm(wavelength)
- Density: 1.05-1.13g/cm3
- Flexural Modulus: 601.542±10% MPa
- Bending Strength: 30.405±10% MPa
- Thermal Deformation Temperature: 80℃
- Volume Shrinkage: 3.72-4.24%
- Linear Shrinkage: 1.05-1.35%
- Tensile Strength: 30.806±10%Mpa
- Tensile Modulus: 353.891±10% Mpa
- Shore Hardness: 85-88D
- Glass Transition Temperature: 100℃
- Notch Impact Strength: 41-48j/m
- Shelf Life: 2 year
Light Odor and Consistent Success
Photopolymer resin can be smelly in some cases. With the refined formula, ELEGOO resin has a very light odor and no pungent smell.Long-time printing can be demanding, but ELEGOO resin ensures consistent, high-quality prints.
Less Brittle and Higher Tenacity
When it comes to printing industrial parts where the toughness of the model is critical, you will need a high standard resin to enable the prototype works flawlessly without any issues. Say no to brittleness and use resin of higher tenacity.
High precision and Low Shrinkage
The fantastic detail performance of the models printed with resin is just like artwork. With low volume shrinkage and volume shrinkage, ELEGOO ABS-like resin ensures the print accuracy and make sure all the parts printed to fit in the right place.
Wide Applications
ELEGOO photopolymer resin is compatible with the LCD 3D printers using the UV light source to cure models.
It has a wide range of application from board game miniatures to industrial parts and components.
You can also use it to print your 3D CAD design works and make it from an idea into reality.
The only limitation is your imagination. Print now and go with ELEGOO.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| ELEGOO 8K Standard Resin | ELEGOO 8K Water Washable Resin | ELEGOO Standard Resin | ELEGOO Water Washable Resin | ELEGOO ABS-Like Resin | ELEGOO Plant-Based Resin | |
| Max. force（KGF） | 165.7±10% | 103.5±10% | 137.6±10% | 105.10±10% | 167.1±10% | 116.5±10% |
| Tensile strength（MPA） | 39.06±10% | 24.39±10% | 32.437±10% | 22.89±10% | 39.39±10% | 27.463±10% |
| Deformation at the point of maximum force（mm） | 5.32±10% | 5.66±10% | 9.863±10% | 8.45±10% | 6.41±10% | 12.338±10% |
| Yield point elongation(%) | 5.71±10% | 5.37±10% | 5.545±10% | 6.92±10% | 6.49±10% | 5.574±10% |
| Elongation at break（%） | 9.4±10% | 10±10% | 17.484±10% | 14.91±10% | 14±10% | 21.811±10% |
| Flexural strength (MPa) | 48.93±10% | 28.08±10% | 29.826±10% | 15.05±10% | 40.54±10% | 20.27±10% |
| Flexural modulus (MPa) | 1412.8±10% | 760.53±10% | 768.676±10% | 327.96±10% | 1089.62±10% | 531.271±10% |
| Impact strength（j/m） | 80±10% | 68±10% | 40.03±10% | 86.90±10% | 205±10% | 58±10% |
| Tensile modulus(MPa) | 538.4±10% | 327.7±10% | 424.97±10% | 232.05±10% | 538.9±10% | 328.562±10% |
| Reason to buy | Non-Brittle and Less Odor | Non-Brittle and Less Odor | Low Shrinkage | Water Washable, Easy to clean | High Toughness | Safe and no irriation |