ELEGOO ABS-Like 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Grey 1000g
-
John W. Hagala
> 3 dayThe combination of this resin being extremely low odor, and flexible enough to throw the mini to the ground makes it a winner. This would be five star, but its claim that it only takes 8 seconds hasnt really panned out for me. Im not certain if Im doing it wrong, but Ive had a lot of failed prints and parts of the print that seem to move or shift, and Im already at 14 seconds. Im using an Anycubic Photon, but Im not sure that should matter because the tech is the same. Regardless of that, if your printing miniatures, highly recommend.
-
Jeannie S. Smith
> 3 dayVery nice to work with
-
JR Padilla
Greater than one weekIt’s works great and prints look fantastic if you’re putting in the proper supports and clean up
-
bootdsc
> 3 dayThe bottle came packaged in a tight fitting air cushion inside a double walled box. No leaks unlike some other brands i have used. Cure times are virtually the same as wanhao and anycubic fast resins. Bed adhesion has been flawless and theres been no failed prints so far. The image i posted shows the clear with some pigments added to simulate a opal. Avoid washing in IPA to prevent clouding, instead use a detergent and ultra sonic cleaner but this holds true for all resins. For the best results cure with 385nm light to prevent yellowing and paint with a spray on clear gloss for a glass like finish.
-
Andrew Jameson
> 3 daybeen working with this to make ghosts. When you add lighting effects behind your prints, Its awsome
-
Kindle Customer
03-06-2025This stuff is pretty cool. I loved the color. I was expecting it to be more transparent, but that may well have been user error. Only thing of note I will say is this stuff STINKS! I have the printer in my bedroom and had this running over night and I had to hide under the covers because of the smell. Its indescribable!!!
-
Cecil
> 3 dayprinter: creality halot one settings: default from printer print quality was excellent , durability and the same as abs. I will be buying this product again
-
Max
> 3 dayElegoos resins are the right combination of price and performance. Theyre simple to use and dont require an extra accommodations to get great quality and perhaps (to some) most importantly, theyre low/no odor. Ive purchased a few colors and theyve all worked well, they also come well packaged in a padded pouch thingy inside a box so there is little chance of damage during shipment. Elegoo resin has become my default choice for standard resin, my only wish is that theyll continue to expand the color options!
-
cody e carney
> 3 dayVery good looking resin and is strong enough for ink pens.
-
Chris Thomas
> 3 dayI love Elegoos ABS-Like. Its tough enough to withstand drops and has good flexibility. Easy to paint and have had no issues with this resin post curing. I love the color options also.
ELEGOO ABS-like photopolymer resin is a type of polymer that changes its physical properties when introduced to light, and it"s VOC free. In the case of 3D printing, this is a typical liquid plastic resin that hardens when exposed to a light source, such as a laser, a lamp, a projector or light-emitting diodes (LEDs) and most of these light sources irradiate ultraviolet (UV) light, which works perfectly with our photocuring resin. It"s a perfect companion for LCD 3D printers, and the print quality is excellent in terms of the details and performances.
Precautions:
- Shake well before use
- Recommended temperature 20°C - 25°C
- Always wear gloves and mask to avoid direct skin contact
- Keep away from children, dust and direct sunlight
- Wash with plenty of water immediately if you get direct skin contact with resin
ELEGOO Photopolymer Resin
Printing Setting:
- Bottom Exposure:60s
- Normal Exposure:8s
Resin Parameters:
- Viscosity: 200-350MPa·s
- Absorption band: 355nm-410nm(wavelength)
- Density: 1.05-1.13g/cm3
- Flexural Modulus: 601.542±10% MPa
- Bending Strength: 30.405±10% MPa
- Thermal Deformation Temperature: 80℃
- Volume Shrinkage: 3.72-4.24%
- Linear Shrinkage: 1.05-1.35%
- Tensile Strength: 30.806±10%Mpa
- Tensile Modulus: 353.891±10% Mpa
- Shore Hardness: 85-88D
- Glass Transition Temperature: 100℃
- Notch Impact Strength: 41-48j/m
- Shelf Life: 2 year
Light Odor and Consistent Success
Photopolymer resin can be smelly in some cases. With the refined formula, ELEGOO resin has a very light odor and no pungent smell.Long-time printing can be demanding, but ELEGOO resin ensures consistent, high-quality prints.
Less Brittle and Higher Tenacity
When it comes to printing industrial parts where the toughness of the model is critical, you will need a high standard resin to enable the prototype works flawlessly without any issues. Say no to brittleness and use resin of higher tenacity.
High precision and Low Shrinkage
The fantastic detail performance of the models printed with resin is just like artwork. With low volume shrinkage and volume shrinkage, ELEGOO ABS-like resin ensures the print accuracy and make sure all the parts printed to fit in the right place.
Wide Applications
ELEGOO photopolymer resin is compatible with the LCD 3D printers using the UV light source to cure models.
It has a wide range of application from board game miniatures to industrial parts and components.
You can also use it to print your 3D CAD design works and make it from an idea into reality.
The only limitation is your imagination. Print now and go with ELEGOO.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| ELEGOO 8K Standard Resin | ELEGOO 8K Water Washable Resin | ELEGOO Standard Resin | ELEGOO Water Washable Resin | ELEGOO ABS-Like Resin | ELEGOO Plant-Based Resin | |
| Max. force（KGF） | 165.7±10% | 103.5±10% | 137.6±10% | 105.10±10% | 167.1±10% | 116.5±10% |
| Tensile strength（MPA） | 39.06±10% | 24.39±10% | 32.437±10% | 22.89±10% | 39.39±10% | 27.463±10% |
| Deformation at the point of maximum force（mm） | 5.32±10% | 5.66±10% | 9.863±10% | 8.45±10% | 6.41±10% | 12.338±10% |
| Yield point elongation(%) | 5.71±10% | 5.37±10% | 5.545±10% | 6.92±10% | 6.49±10% | 5.574±10% |
| Elongation at break（%） | 9.4±10% | 10±10% | 17.484±10% | 14.91±10% | 14±10% | 21.811±10% |
| Flexural strength (MPa) | 48.93±10% | 28.08±10% | 29.826±10% | 15.05±10% | 40.54±10% | 20.27±10% |
| Flexural modulus (MPa) | 1412.8±10% | 760.53±10% | 768.676±10% | 327.96±10% | 1089.62±10% | 531.271±10% |
| Impact strength（j/m） | 80±10% | 68±10% | 40.03±10% | 86.90±10% | 205±10% | 58±10% |
| Tensile modulus(MPa) | 538.4±10% | 327.7±10% | 424.97±10% | 232.05±10% | 538.9±10% | 328.562±10% |
| Reason to buy | Non-Brittle and Less Odor | Non-Brittle and Less Odor | Low Shrinkage | Water Washable, Easy to clean | High Toughness | Safe and no irriation |