ELEGOO ABS-Like 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Grey 1000g
-
Jim Sayger
> 3 dayColor
-
Margaret
> 3 dayThis stuff is great, its print quality on my mars 3 pro is unbelievable. Good strength and practical solution for my needs, drop testing on concrete was passed with flying colors. Barely a mark was left, leaving little to be desired with this resin. Accurate, strong and just the right amount of flex. Finished prints feel great in the hand, perfectly accurate prints every single time. Great purchase!
-
1seanman
> 3 dayFirst bottle came with a leak. Reached out to customer service and the took care of the issue promptly. Would 10/10 recommend elegoo as a product and a company. prints are coming out great!
-
N. Catalfamo
> 3 dayIve had the best luck with Elegoo resins. Im also been playing with a few others, but Im having the most success with the Elegoo ones. I recently purchased a large bottle of Elegoo white and translucent and some different colored dyes to be able to make my own custom colors. When learning a new machine or printing style its always a good choice to stick with the company available filament or resin. It allows you to use settings that have been verified by the company to work so it removes the guesswork you may experience with other brand resins.
-
Wilbur Li
> 3 dayMy experience with this resin has been that it cleans up very easily with 99% IPA, cures pretty well with minimal shrinkage, and captures a good amount of detail. That said, the resin feels like its a bit on the soft side even after it was fully cured and somewhat brittle so I would be careful in using it for functional parts. For my purposes of scale modeling though, it is an excellent resin.
-
Ahmad
Greater than one weekThe resin is not really white after dray it its become like beige but i like it. The print details is amazing and it price is good
-
Paganlounge
> 3 dayIm new to resin 3d printing, so while researching what kind of resin to get to begin with, I was looking for something that wouldnt be terribly brittle but I also didnt need prints I could throw across the room or anything. For the price this stuff sure delivers! It will break with too much pressure on this parts, but as you can see Im printing tabletop miniatures which are all basically all thin parts and the flexibility in this resin has helped with support removal and painting. I think, for someone just starting out, this is a great resin.
-
NeroMaverick
07-06-2025When I bought my 3D printer (Elegoo Mars 2 Pro), I got two resins. The Elegoo ABS-like Gray, and the Siraya Tech Gray. The Elegoo Gray resin has worked very well, however Ive noticed that it tends to take the edges off the prints. I can understand why some might want this. Its similar to applying a slight blur to remove aliasing from an image. You get less of that wood grain look after a print has finished when using it. I would recommend this more for models and less for parts In comparison the Siraya Tech resin doesnt seem to do this as much. Its much less soft and makes prints with harder edges, which means that wood grain look is more prominent. But this also means that it can print finer details on models as well. I would recommend this for part making over models.
-
Joe Keane
> 3 dayIve had solid results with this resin on my Photon. Using settings suggested on Photonsters spreadsheet. Gaslands scale miniatures still on supports in first photo, 28mm fantasy figs on FDM printed bases in 2nd photo. I normally print 28mm minis without bases. Makes it easier to print and remove supports. I base them later, sometimes using just plain PLA FDM printed bases.
-
dwight dunbar
> 3 dayI should have taken a picture of the vat when I took the prints out. It was nothing but wasted resin in large clumps all over the vat. This mess tore through the FEP and cured on the screen. 2 out of the 5 prints running at the time failed. This is where it messed up the screen. The print was supposed to use 227ml but all 500ml of resin was used up because it was all turned into clumps. I used the setting printed on the bottle for the timing. If this mess can’t be cleaned off of my Photon Mono X I am going to be pissed! The only up side is that the completed prints are very durable despite not being perfect in their smooth surface detail.
ELEGOO ABS-like photopolymer resin is a type of polymer that changes its physical properties when introduced to light, and it"s VOC free. In the case of 3D printing, this is a typical liquid plastic resin that hardens when exposed to a light source, such as a laser, a lamp, a projector or light-emitting diodes (LEDs) and most of these light sources irradiate ultraviolet (UV) light, which works perfectly with our photocuring resin. It"s a perfect companion for LCD 3D printers, and the print quality is excellent in terms of the details and performances.
Precautions:
- Shake well before use
- Recommended temperature 20°C - 25°C
- Always wear gloves and mask to avoid direct skin contact
- Keep away from children, dust and direct sunlight
- Wash with plenty of water immediately if you get direct skin contact with resin
ELEGOO Photopolymer Resin
Printing Setting:
- Bottom Exposure:60s
- Normal Exposure:8s
Resin Parameters:
- Viscosity: 200-350MPa·s
- Absorption band: 355nm-410nm(wavelength)
- Density: 1.05-1.13g/cm3
- Flexural Modulus: 601.542±10% MPa
- Bending Strength: 30.405±10% MPa
- Thermal Deformation Temperature: 80℃
- Volume Shrinkage: 3.72-4.24%
- Linear Shrinkage: 1.05-1.35%
- Tensile Strength: 30.806±10%Mpa
- Tensile Modulus: 353.891±10% Mpa
- Shore Hardness: 85-88D
- Glass Transition Temperature: 100℃
- Notch Impact Strength: 41-48j/m
- Shelf Life: 2 year
Light Odor and Consistent Success
Photopolymer resin can be smelly in some cases. With the refined formula, ELEGOO resin has a very light odor and no pungent smell.Long-time printing can be demanding, but ELEGOO resin ensures consistent, high-quality prints.
Less Brittle and Higher Tenacity
When it comes to printing industrial parts where the toughness of the model is critical, you will need a high standard resin to enable the prototype works flawlessly without any issues. Say no to brittleness and use resin of higher tenacity.
High precision and Low Shrinkage
The fantastic detail performance of the models printed with resin is just like artwork. With low volume shrinkage and volume shrinkage, ELEGOO ABS-like resin ensures the print accuracy and make sure all the parts printed to fit in the right place.
Wide Applications
ELEGOO photopolymer resin is compatible with the LCD 3D printers using the UV light source to cure models.
It has a wide range of application from board game miniatures to industrial parts and components.
You can also use it to print your 3D CAD design works and make it from an idea into reality.
The only limitation is your imagination. Print now and go with ELEGOO.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| ELEGOO 8K Standard Resin | ELEGOO 8K Water Washable Resin | ELEGOO Standard Resin | ELEGOO Water Washable Resin | ELEGOO ABS-Like Resin | ELEGOO Plant-Based Resin | |
| Max. force（KGF） | 165.7±10% | 103.5±10% | 137.6±10% | 105.10±10% | 167.1±10% | 116.5±10% |
| Tensile strength（MPA） | 39.06±10% | 24.39±10% | 32.437±10% | 22.89±10% | 39.39±10% | 27.463±10% |
| Deformation at the point of maximum force（mm） | 5.32±10% | 5.66±10% | 9.863±10% | 8.45±10% | 6.41±10% | 12.338±10% |
| Yield point elongation(%) | 5.71±10% | 5.37±10% | 5.545±10% | 6.92±10% | 6.49±10% | 5.574±10% |
| Elongation at break（%） | 9.4±10% | 10±10% | 17.484±10% | 14.91±10% | 14±10% | 21.811±10% |
| Flexural strength (MPa) | 48.93±10% | 28.08±10% | 29.826±10% | 15.05±10% | 40.54±10% | 20.27±10% |
| Flexural modulus (MPa) | 1412.8±10% | 760.53±10% | 768.676±10% | 327.96±10% | 1089.62±10% | 531.271±10% |
| Impact strength（j/m） | 80±10% | 68±10% | 40.03±10% | 86.90±10% | 205±10% | 58±10% |
| Tensile modulus(MPa) | 538.4±10% | 327.7±10% | 424.97±10% | 232.05±10% | 538.9±10% | 328.562±10% |
| Reason to buy | Non-Brittle and Less Odor | Non-Brittle and Less Odor | Low Shrinkage | Water Washable, Easy to clean | High Toughness | Safe and no irriation |