ELEGOO ABS-Like 3D Printer Resin LCD UV-Curing Resin 405nm Standard Photopolymer Resin for LCD 3D Printing Grey 1000g

(1070 Reviews)

Price
$19.99

Color
Quantity
(140000 available )

Total Price
Share
448 Ratings
305
45
33
23
42
Reviews
  • Bradley Zeitler

    > 3 day

    I print LOTS of DND minis - this doesnt make them indestructible, but its definitely better than standard gray!

  • Gandy

    > 3 day

    Elegoo resin is up there with the best of the resins available both for their open Mars machines and for similar mSLA printers. The price is great and the print qualities are gorgeous to look at. Nice and durable prints, great detail and finish. I only wish the resin was available from Amazon Australia, but even with international shipping, the price was competitive with local alternatives. If Im ever able to ship it to Australia again (thanks COVID!!) Ill definitely buy more.

  • Christopher Wilson

    > 3 day

    This is my first resin purchase but after reading a bunch of horror stories from other brands and colors, I can safely say I have had zero problems cranking out quality prints with this stuff.

  • Daniel Gonzalez

    > 3 day

    I gave this a 4 star because there is no way to achieve the white they are depicting, or at least not one that I have found. Using the sun in small short burst, cloudy days, even low powered UV leds yellowed the cured resin. Other than that the stuff is top notch and would recommend if you dont care about the end color of the model. Right off of the build platform of my MARS, the stuff is white as can be! Thanks ELEGOO for great and reliable products!

  • SR B.

    > 3 day

    Im using the resin with an Elegoo Mars 2 Pro mono with excellent highly detailed results which is important when printing jewelry with fine detail like the prongs to set gemstones in.

  • Antonio Beltrán

    Greater than one week

    After months of printing with different colors, grey was better. However, I do not know if I received an older bottle because I was getting brittle prints and the worst smell Ive experienced in my life. It got stuck to my shop for days, so I printed once per month. I have not seen other reviews where they comment on the terrible smell, but it was close to burnt rubber

  • Mathmatics

    > 3 day

    This resin works excellent. No issues so far. It is my go to resin from now on. Using it with my Phrozen Shuffle setting the cure time at about 9 seconds.

  • Twyla Perry

    > 3 day

    Its stinks, but its chemicals. So you should already know that. Other than that its great

  • M.C.

    06-06-2025

    Did this resin print good? Yes it did, however that is only half the battle. This resin lacks the proper pigment stabilizers required to avoid color shift after exposure to uv light. Out of the chamber the print looked good however after curing the white turned a brown yellow color. You can see in the picture what white is supposed to be and what it actually looks like. Do yourself a favor and only buy black from this company and stick to higher quality brands for anything lighter

  • BIRD LOVER

    > 3 day

    My son makes Animation figures. He loves the results of the products with this resin

11

ELEGOO ABS-like photopolymer resin is a type of polymer that changes its physical properties when introduced to light, and it"s VOC free. In the case of 3D printing, this is a typical liquid plastic resin that hardens when exposed to a light source, such as a laser, a lamp, a projector or light-emitting diodes (LEDs) and most of these light sources irradiate ultraviolet (UV) light, which works perfectly with our photocuring resin. It"s a perfect companion for LCD 3D printers, and the print quality is excellent in terms of the details and performances.

11

11
Precautions:

  • Shake well before use
  • Recommended temperature 20°C - 25°C
  • Always wear gloves and mask to avoid direct skin contact
  • Keep away from children, dust and direct sunlight
  • Wash with plenty of water immediately if you get direct skin contact with resin

ELEGOO Photopolymer Resin

Printing Setting:

  • Bottom Exposure:60s
  • Normal Exposure:8s

Resin Parameters:

  • Viscosity: 200-350MPa·s
  • Absorption band: 355nm-410nm(wavelength)
  • Density: 1.05-1.13g/cm3
  • Flexural Modulus: 601.542±10% MPa
  • Bending Strength: 30.405±10% MPa
  • Thermal Deformation Temperature: 80℃
  • Volume Shrinkage: 3.72-4.24%
  • Linear Shrinkage: 1.05-1.35%
  • Tensile Strength: 30.806±10%Mpa
  • Tensile Modulus: 353.891±10% Mpa
  • Shore Hardness: 85-88D
  • Glass Transition Temperature: 100℃
  • Notch Impact Strength: 41-48j/m
  • Shelf Life: 2 year
11

Light Odor and Consistent Success

Photopolymer resin can be smelly in some cases. With the refined formula, ELEGOO resin has a very light odor and no pungent smell.Long-time printing can be demanding, but ELEGOO resin ensures consistent, high-quality prints.

11

Less Brittle and Higher Tenacity

When it comes to printing industrial parts where the toughness of the model is critical, you will need a high standard resin to enable the prototype works flawlessly without any issues. Say no to brittleness and use resin of higher tenacity.

11

High precision and Low Shrinkage

The fantastic detail performance of the models printed with resin is just like artwork. With low volume shrinkage and volume shrinkage, ELEGOO ABS-like resin ensures the print accuracy and make sure all the parts printed to fit in the right place.

11

Wide Applications

ELEGOO photopolymer resin is compatible with the LCD 3D printers using the UV light source to cure models.

It has a wide range of application from board game miniatures to industrial parts and components.

You can also use it to print your 3D CAD design works and make it from an idea into reality.

The only limitation is your imagination. Print now and go with ELEGOO.

1 1 1 1 1 plant based
ELEGOO 8K Standard Resin ELEGOO 8K Water Washable Resin ELEGOO Standard Resin ELEGOO Water Washable Resin ELEGOO ABS-Like Resin ELEGOO Plant-Based Resin
Max. force(KGF) 165.7±10% 103.5±10% 137.6±10% 105.10±10% 167.1±10% 116.5±10%
Tensile strength(MPA) 39.06±10% 24.39±10% 32.437±10% 22.89±10% 39.39±10% 27.463±10%
Deformation at the point of maximum force(mm) 5.32±10% 5.66±10% 9.863±10% 8.45±10% 6.41±10% 12.338±10%
Yield point elongation(%) 5.71±10% 5.37±10% 5.545±10% 6.92±10% 6.49±10% 5.574±10%
Elongation at break(%) 9.4±10% 10±10% 17.484±10% 14.91±10% 14±10% 21.811±10%
Flexural strength (MPa) 48.93±10% 28.08±10% 29.826±10% 15.05±10% 40.54±10% 20.27±10%
Flexural modulus (MPa) 1412.8±10% 760.53±10% 768.676±10% 327.96±10% 1089.62±10% 531.271±10%
Impact strength(j/m) 80±10% 68±10% 40.03±10% 86.90±10% 205±10% 58±10%
Tensile modulus(MPa) 538.4±10% 327.7±10% 424.97±10% 232.05±10% 538.9±10% 328.562±10%
Reason to buy Non-Brittle and Less Odor Non-Brittle and Less Odor Low Shrinkage Water Washable, Easy to clean High Toughness Safe and no irriation

Related products

Shop
( 2347 Reviews )
Top Selling Products