Enbrighten Z-Wave Plus Smart Outdoor Switch, 1-Outlet Plug-In (2nd Gen.), Weather-Resistant, Works with Alexa, Google Assistant, for Landscape & Seasonal Lighting, ZWave Hub Required, 14298,Black

Pricey for only being able to turn on/off both outlets at once - but it works well. Paired with my HUSBZB-1 stick and HomeAssistant easily, and helped range issues I was having with my Kwikset 910 front door lock, as it kept losing its pairing with my z-wave stick.

Worked Great for the Christmas Lights. Nothing like saying ok google, turn on Christmas

As the headline says: It has a power button on top. Its very hard to see it. If you dont press the button - you cant pair it to the controller. Once I figured out the damn button, it was easy to pair and worked fine with my smart things controller gen 1.

I have this connected to a Hubitat C7 and at random times of the day, it sends a barrage of status messages to the hub with on/off status. Enbrighten Tech Support say its a problem with my hub, but all the hub is doing is monitoring and displaying real time messages sent over z-wave. This will be the last Enbrighten/Jasco product buy.

Easy to pair, reliable connectivity.

Ive always liked the Enbrighten Z-Wave controls, until this one. It works fine, its just difficult to install because the CORD IS TOO SHORT to plug-in to the waterproof electrical outlet and attached the switch to the wall facing down like the instructions describe. I cant believe they missed this design flaw.

Almost 2 years to the date since I bought these switches. I bought 2 of them for my Kitchen area and bar area. Initial installation and pairing with SmartThings was just fine had no issues. The outlet pretty much worked as expected for the most part for 2 years. Then one day we removed one from the outlet to plug something else in temporarily. Plugged unit back in and the switch no longer works. It continues to turn on and off and on and off over and over. So I decided to try my 2nd switch at the other side of the room. It does the same thing. After much troubleshooting with the app and SmartThings support I get one of them to stop and start working again. One of them will not. That was the case for about a week or so when further troubleshooting by SmartThings suggestions and my 2nd switch starts doing it again. On and off and on and off over and over. You cannot reset the switch it is worthless now both of them and $70. Smart things now says that this GE switch is not supported and I need to contact the Mfg of the switch. The Mfg says its supported by Smart Things. So its the blame game now. In the end.. This switch should NOT be advertised as supported by Smart Things. I have multiple devices on my Smart Things home and most of them work fine. This one does not. I would avoid if you are on Smart Things. Im frustrated with both so I may end up leaving Smart Things for another system all together.

I have had issues for the past year trying to get Zwave devices to connect in a building next door. I have tried multiple devices and all of them have failed until I got this switch. I am only using them as repeaters so Im not sure how well the switching works however it does click on/off when I tell it to. I used one in each building with one inside and one outside on opposite buildings. I will probably order more and use them to operate my dogs dog house fan and heat lamp.

I replaced a vacuum cord my dog chewed. He actually chewed 2 vacuum cord and one required 3 prong and the other 2 prong. With a little soldering and time I got my vacuums working again.

First, it has to work with legacy Leviton Z-Wave systems, and it does. Some of the devices marked as Z-Wave Plus dont work with some of the earlier controllers that connect to the HAI Omni security systems. This one does. It will work with the Vizia RF + Plug-in Serial Interface Module RS232 (VRC0P-1LW) connected to an HAI or Leviton Home Automation system. It was very easy to pair, and with the blue power LED on top, its easy to see that the switch is on. Also, the dual plugs are handy, when you have two items (like a light and something else) to control.