

Enbrighten Z-Wave Plus Smart Outdoor Switch, 1-Outlet Plug-In (2nd Gen.), Weather-Resistant, Works with Alexa, Google Assistant, for Landscape & Seasonal Lighting, ZWave Hub Required, 14298,Black
-
Mark Herring
Greater than one weekThis plug requires a compatible hub to control. The hubs are expensive and not plug and play. Buyer beware.
-
Yurii Havey
Greater than one weekWorks well, integrated into my ST hub with Alexa. First step into home automation.
-
Tommy
Greater than one weekDoes Not work with ADT
-
Till R.
> 3 dayWe purchased this item back in late 2017 but never installed it - until recently (January 2022). After 3 months it started making a constant clicking noise - like a relay closing and opening again - very loud and noticeable. Our Z-Wave controller also shows the switch as offline. Reset or re-integration with Z-Wave isnt possible and clicking noise persists. Cannot recommend.
-
Trinity
> 3 dayI have ordered 14 of these units since I first set up our smart hub in 2016 (we have a lot of accent lights) but I am replacing them all now one by one as they fail. Sometimes it is a power outage other times there is no reason - they just fail and then click on and off incessantly (which has to be great for the appliances I have plugged into them). Besides this GE brand, we have many other brands and types of smart plugs (inovelli, Gosund, HAOZEE) and none of them have failed since 2016. Additionally, I ordered the dimming version of this switch with separate controls for each of the two outlets and it wasn’t recognized by my smart hub (the inovelli dual separate switch has no problem with the hub). I really like design and for the most part they usually connect pretty easily (although I have had the problems others have had). I wish the inovelli was still available because the design works so well behind furnishings and with cord management. Unfortunately, due to my historical experience I would avoid the GE product.
-
Gkel
> 3 dayAlmost 2 years to the date since I bought these switches. I bought 2 of them for my Kitchen area and bar area. Initial installation and pairing with SmartThings was just fine had no issues. The outlet pretty much worked as expected for the most part for 2 years. Then one day we removed one from the outlet to plug something else in temporarily. Plugged unit back in and the switch no longer works. It continues to turn on and off and on and off over and over. So I decided to try my 2nd switch at the other side of the room. It does the same thing. After much troubleshooting with the app and SmartThings support I get one of them to stop and start working again. One of them will not. That was the case for about a week or so when further troubleshooting by SmartThings suggestions and my 2nd switch starts doing it again. On and off and on and off over and over. You cannot reset the switch it is worthless now both of them and $70. Smart things now says that this GE switch is not supported and I need to contact the Mfg of the switch. The Mfg says its supported by Smart Things. So its the blame game now. In the end.. This switch should NOT be advertised as supported by Smart Things. I have multiple devices on my Smart Things home and most of them work fine. This one does not. I would avoid if you are on Smart Things. Im frustrated with both so I may end up leaving Smart Things for another system all together.
-
Doris Yundt
> 3 dayWorks great with my Honeywell Lyric Controller. I can turn on and off lights manually from the controller or from my phone with the Honeywell Lyric App while on my network or let the controller turn the lights on or off based on triggered events.
-
Nosaj
> 3 dayI now own two of these. Each time I had trouble pairing (just enough time in between purchases that I forgot how). It isn’t as intuitive as other Z-wave devices and there is no indication once it is in pairing mode. After initial pairing, both have worked great. They are outdoors in the elements with no issues.
-
Cesar
Greater than one weekWorks as expected. Connected by ZWave via Alarm.com. *****Had to plug appliance to female end of device for device to pair up with ZWave hub******
-
ahiker4u
> 3 dayWorks well with ADT Command. You don’t need to contact ADT. You can install and delete it from your account with the ADT software, provided you are a subscribed customer and under a contract. There is a slight delay when turning the switch on from a cell phone but that seems normal. Other than that this device is rock solid. I have 7 of these with different options. None have failed in the past year. I recommend.